Welcome to my NEW BLOG!

Cindi Bisson - Fat Cat Creations is now Cindi McGee - Behind These Eyes™. Since I've been on this creative journey for over 18 years - I have a LOT of project links out there in cyberworld! If you are looking for a particular project you have found on Pinterest, Facebook, FaveCrafts, HomeTalk, Twitter, etc. and the link is not working for you, please feel free to email me at cdjb11@yahoo.com and I'll be sure to get you the new link to the instructions. Have a creative day and remember to DARE TO BE DIFFERENT!

Search This Blog

Sunday, October 29, 2017

Mermaid Mask & Polymer Clay Adventure in Paradise Retreat

Photo courtesy of Deborah Lahita
I just returned from a week of creativity at the Polymer Clay Adventure in Paradise in Kill Devil Hills, NC.  It was an amazing experience to be surrounded by almost 30 creative women and to take some awesome classes from some of the top polymer clay instructors in the industry.     Lisa Renner taught an amazing "Sea Goddess" vessel workshop - each of the finished vessels was so unique - and everyone did a fantastic job!  Syndee Holt shared several fabulous techniques that we were all obsessed with trying.  Ilysa Ginsburg taught us how to cane - something I have wanted to learn for over 15 years since seeing Donna Kato do it on the Carol Duvall Show!   And Kyra Slye taught us how to create mermaid masks custom made to fit our own faces.   We also had a fabulous bead swap - I am blown away by the creativity of all of these artists!

I admired a handmade ring made by Moyra Riley   on the last morning of the retreat, and she generously gave it to me - I LOVE IT!  It was a wonderful adventure, a great chance to get to know some amazingly creative ladies, and to make new friends.  

My first kaleidoscope canes from Ilysa Ginsburg's class!
Lisa Renner's workshop projects - photo courtesy of Ilysa Ginsburg & Kyra Slye 
Syndee Holt 
Lisa Renner
Bead Swap Haul! 

Photo courtesy Syndee Holt - one of the techniques she taught
Photo courtesy Syndee Holt - one of the techniques she taught


Saturday, October 21, 2017

Brown-Eyed Susan Clay Pendant

Brown-eyed Susan! My project based on Brooke Bock's awesome PCA workshop! I love the rustic "earthy" feel of the finished piece! It's not too late to join the 2017 ADVENTURE and learn this technique, and 23 more! And at the end of the year you can download the tutorials and finish them at your own pace!  http://bit.ly/CM2017PCA 

Tuesday, October 17, 2017

Etched Slate House Coasters - DIY Video

This week When Creativity Knocks begins airing our Build a Village Series sponsored by StencilGirl Stencils and JudiKins!  This first episode features my etched slate house coasters.  A full supply list is also shared below. 

StencilGirl™ Stencils - Once Upon a Time & Houses 
JudiKins™ - Color Sponges 
etchall® - Etching Creme, Squeegee, Reposition/Reuse Stencil Spray
Kunin® Felt - EcoFi® ClassicFelt® - Ruby
Beacon Adhesives™ - Fabri-Tac, 527 Adhesive 
DecoArt® Americana Decor™ - Chalky Finish Paint - Relic, Color Stain - Brick 
Loew-Cornell® Woodsies 
Scissors, paintbrush 

Corpse Cola & Ghoul Aid - Halloween Decor

What do the creatures of the night choose for a beverage when they need a change from drinking blood?  Why Corpse Cola and Ghoul Aid of course!  


etchall® Dip n’ Etch 
etchall® Stencil ComboPak
etchall® Stencil Cut/Pic Knife
etchall® Light My Bottle™ 
Empty green glass and clear glass bottles 
Electronic die cutting machine & software
DecoArt® Glass Paint Markers™ - White, Green 
DecoArt® Americana® Crystal Gloss Enamels® - Black
DecoArt® Americana® Gloss Enamels® - Purple Cow 
Plastic container to hold dip n’ etch while etching
Spellbinders® Artisan X-Plorer™ 
Spellbinders®  Shapeabilities Collection - Halloween 


Working on software that works with your electronic die cutting machine, begin by selecting the font for the text on your bottles.   I chose “Exquisite Corpse” for the Corpse Cola, and “Green Fuz” for the Ghoul Aid.   Size your text to fit your bottle.  Cut from etchmask.   Size skull image to fit bottle as desired - cut from etchmask.  Use knife to weed excess etchmask from around lettering/skull.  (If you do not have an electronic die cutting machine that will allow you to make custom images - do not “fear”… simply print the text, cut out the letters leaving the border area in tact, and then trace onto etchmask.  Cut out letters with stencil cut knife to create masking letters for your bottles!)

Use transfer paper to transfer lettering to bottles.  

Use Spellbinders® Artisan X-Plorer® to cut graveyard from etchmask.  Apply graveyard to bottom of Corpse Cola bottle.

Cut ligthening bolts from etchmask.  

Mount skull and lightening bolts to top of Ghoul Aid bottle.   

We are etching the entire bottle, so it is not necessary to use water to pre-determine how much dip n’ etch to pour into the container. 

Place first bottle into container.  Carefully pour etchall® dip n’ etch to fill container.  Let set 15 minutes, remove bottle, turn over, and insert top portion to etch.  Let set 15 minutes then remove.  Repeat with second bottle.   Pour dip n’ etch back into bottle - it is reusable!   Wash bottles and remove etchmask.   

Pour a small amount of black DecoArt® Americana® Crystal Gloss Enamels® paint into the green Corpse Cola bottle, let run to the bottom of the bottle.  Then  cover the top of the bottle, turn upside down, and rotate to cause the paint to unevenly run down the inside of the bottle.   Turn upright and let paint dry - some areas will have more paint than others - I liked the somewhat ghoulish effect of the blotchy paint inside the bottle.   

For the Ghoul Aid bottle, I added a small amount of purple cow DecoArt® Americana® Gloss Enamels® paint to the bottle, and a few drops of water, then rotated the bottle to unevenly distribute the paint inside the bottle.  Let dry.  

Use white DecoArt® Glass Paint Marker™ to add dot outline around un-etched Corpse Cola and graveyard on green bottle, and green marker to outline the un-etched areas on the Ghoul Aid bottle. 

Insert “Light My Bottle” fairy lights into the Corpse Cola bottle to add a creepy glow! 

Thursday, October 12, 2017

Tuesday, October 10, 2017

Etched Skull Cyrstal Pendant - DIY Video

In this week's When Creativity Knocks Halloween Happenings Series episode, I'm sharing a fun way to create an etched skull pendant - Creepy goes elegant with etchall®!   

"Land Shark" Glasses

My husband and I recently received a creative surprise made by my father and our son Thomas!  “Land Shark” beer is one of Ken and Danny’s favorites, so it seemed like the perfect choice for making a fun set of glasses!    I thought it would be interesting to share how they created the glasses.


Clean empty glass beverage bottles
Glass cutting tool
PVC pipe
Rotary sander
Large pots for water 


First - some tips they have after creating several batches of these bottle glasses - always start with about double the amount of bottles that you expect finished glasses for.  There is a high chance of breakage in the various steps involved.    Also, because of the potential breakage issues, we would recommend you wear work gloves to help decrease the chance of being cut.  

The first step was to “empty” several glass beverage bottles, then wash them and let them dry. 

Next, he built a “jig”.  Two pieces of scrap wood were used as the base.  One on the bottom, and one on the left edge.   A piece of pvc piping was screwed to the outside edge of one of the boards to create a “stop” and help hold the bottle in place.   He used a bottle to determine where he wanted to make the cut in the bottles, then he cut a notch in the wood and mounted a glass cutting tool to the block in the right location.   The finished “jig” is held in place with a clamp. 
The bottles were then placed on the jig, and rotated to create an etching line.

A large pot of boiling water and a large pot of ice water are the next two things needed. 

Carefully submerge the top of the bottle just to the etched line in the boiling water.  Wait       15-20 seconds then remove and immediately place into ice water. 

The glass will break clean on the etched line.  Repeat until all bottles are cut. 

Sand the rough edge of the glass to smooth.  They began with 80 grit wet sanding and worked up to at least 320 grit until the rims were smooth enough for drinking.  If you have a rotary sander available, it can help speed up the process somewhat, but hand sanding will still be required to get a smooth finish. The sanding will take quite a bit of time - patience is a requirement! 

The glasses are now ready for use.  We recommend hand washing them as the labels are more likely to come off sooner in a dishwasher, etc.  If you are using bottles where the “label” is actually painted on the bottle, a dishwasher would probably be fine! 

The guys plan to do some experimenting with other colors of bottles and have been on the search for green, blue, and brown bottles - even without the labels they would make colorful additions to our glassware!

Friday, October 6, 2017

Etched Glass Finger Food Halloween Plate - DIY Video

It's time for more creepy fun!  In this week's When Creativity Knocks episode I'm sharing a spooky fun way to serve some ghoulish Halloween treats!  etchall® makes it easy!  I added just a touch of color with some DecoArt® Glass Paint Markers™.

Tuesday, October 3, 2017

October Newsletter

My monthly newsletter -  Creative Crafting with Cindi McGee - Behind These Eyes™ - is now live!  Subscribe to receive future issues and view this current issue and all past issues.   A monthly snapshot of what I've created, where I'll be teaching, highlighting inspiration from a fellow artist and more. 

Have a creative day everyone!

Sunday, October 1, 2017

Twisted "Metal" Pendant - Polymer Clay Universe Magazine

I'm excited to share that I have another project featured in the October 2018 issue of Polymer Clay Universe Magazine!  My "twisted metal" pendant tutorial made with Makin's Clay® and DecoArt® Metallic Lustre™ is part of a great assortment of projects this month!